Nitrous Pro Flow 810100 - NPF Progressive Nitrous Controller

- Drives two nitrous stages and purge solenoid. Capable of 40 amp output on each stage.

- Each stage is independently programmable based on throttle position, RPM, vehicle speed, time delay, and first gear lockout. Adds capability for RPM or time based progressive control.

- Output for purge solenoid (requires external relay). Programmable automatic purge when system is armed.

- Flexible RPM input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug).

- General purpose input/output (GPIO) terminal. Programmable for use as shift light output, additional stage enable input, or control output for ignition retard.

- Status LED output (ideal for use with arming switch containing LED).

- Built-in data logging. Ideal as basic vehicle data logger during dyno tuning or drag racing. Logs data whenever system is armed. Stores last 5 minutes of data at 10 samples/second.

- Data logged includes throttle position, RPM, vehicle speed, status of all inputs and outputs, and two 0-5 volt analog inputs.

- Heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.

- Compact size: 4.1”L x 2.8”W x 1.1”H (not including mounting feet and terminal block).

- USB interface to laptop PC. Powerful Windows software for programming controller and downloading logged data.